 Description
Azo Ski Lift 1100 Carpet and Module is an indoor-outdoor 3-on-2 ribs pattern specialty carpet product designed for use in seasonal snow applications. Ski Lift 1100 resists UV, light and salt. The product has a breathable water permeable backing.
Special Order Colors (4000 sft. minimum orders)
Manufacturing Technology
AZO 3-on-2 ribs 1100 is manufactured as a proprietary Fiber V-loop double needled 1/4" gauge flat 3-on-2 ribs pattern latex backed construction from blended 100% heavy denier (18-240 d.p.f.) snow white branded ASOTA olefin fibers, in a UV light fade- and chemical and mildew resistant product. The materials have a primary latex backing that extends to the middle of the carpet, but shall not extend to the pile fiber.
A proprietary secondary backing is blended from natural and ground recycled rubber and penetrates into half the total thickness to make the carpet water permeable.
Recommended Application
Azo Ski Lift 1100 3-on-2 ribs rolls are stretched over the ground or glued to ski lift platforms. The presence of the carpet minimizes the requirement and labor to re-apply snow in these heavy ski traffic areas so as to avoid damage to skis where snow has melted or worn away. Ski resorts typically replace the carpet that was stretched over frames on the ground annually, but Ski Lift carpet glued to wooden lift platforms can last for several seasons.
Ski Lift 1100 3-on-2 ribs carpet is not suitable for heavy traffic, for entrances, spike traffic, or rolling loads. The product must be 100% glued because of it's marginal dimensional stability.
Short Form Specification: (See Group IV Specifications)
Carpet shall be Azo Ski Lift 1100 3-on-2 ribs (32 ozs/sy) 1/4" gauge double needled indoor outdoor carpet with a water permeable latex backing, as manufactured by ISO 9001 Certified Manufacturer AZO GMBH, Germany and as distributed by Tek Stil Concepts, Inc., P.O. Box 67, Haddonfield NJ 08033. Carpet shall be in rolls 6'6" x 70' (2m x 21m), in color Snow White.
Installation
The carpet must be glued over wood, concrete or metal platforms with approved TSC-300 adhesive per General Azo Installation Instructions. Ski Lift 1100 may alternately be stretched and held by buried supporting frames.
Maintenance:
For wet cleaning, use a hose, weather permitting.
Limitations of Warranty
Please consult details of limited warranty for UV resistance (outdoor applications); Product purchase, purchase of adhesive TSC-300, and installation details must be registered at the time of installation.
In the event of a warranty claim established to the manufacturer's satisfaction, AZO GMBH agrees at its option, to repair or to replace the product out of current lines at the time of replacement. The labor costs of removing and/or reinstalling replacement materials and associated freight costs are to be borne by the purchaser. No liability will be assumed for any consequential damage, loss or expense. No liability will be assumed for commercial shade variations or for materials with visible defects after such materials have been installed.
|
