 Description
Remp Dotfloor AP is a homogeneous rubber tile in a dot speckled color pattern. The product is manufactured in the European Union (Italy) in an UNI EN ISO 9001:2008 and EN14041 certified facility.
Recommended Application
Use Dotfloor AP tiles for heavy commercial traffic conditions. Since the products may be installed with acrylic pressure sensitive Adhesive or Sigaway® Original Dry Adhesive they may be used in lieu of carpet tile and are removeable.
Manufacturing Technology
Remp Rubber Easyway DOTFLOOR AP Tiles have high traffic wear resistance, high traction, impact noise reduction and are easy to clean. Remp Rubber Tiles are made from natural and synthetic rubber with re-inforcing mineral filler and color pigments. Tiles are free of PVC, halogens, formaldehyde, asbestos, plastic monomers, heavy metals or CFC. Rubber tiles are recyclable.
Physical Dimensions
| Thickness: |
0.2 gauge |
(5 mm) |
| Size: |
19.6” x 19.6” |
(500 x 500mm) |
| Weight: |
1.43 lb./sft. |
(7 Kg/m2) |
Physical Properties
Please consult the table Remp Physical Properties
Installation
Always store materials dry and condition materials, building and adhesives for at least 48 hours at >68°F. Install only on level approved sub-floor surfaces which have a Permanent Moisture Barrier and are dry <3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per the Concrete Subfloors Moisture Testing Specification. Easyway Rubber tile may be installed Sigaway® Original textile re-enforced dry pressure sensitive adhesive or with UZIN KE 2000 S water based pressure sensitive acrylic adhesive.
Cleaning and Maintenance
Please consult Cleaning Instructions for Rubber Floors for details of Initial Deep Cleaning, Daily Cleaning and Restorative Maintenance.
Limited Warranty
Limited warranty is available only if materials are installed professionally, with approved adhesives, on suitable and approved sub-floors, which have a permanent Moisture Barrier and are dry <3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per the Concrete Subfloors Moisture Testing Specification.
In the event of a warranty claim established to the manufacturers satisfaction, the manufacturer agrees at its option, to repair or to replace the product out of current lines at the time of replacement. The labor costs of removing and/or reinstalling replacement materials and associated freight costs are to be borne by the purchaser. No liability will be assumed for any consequential damage, loss or expense. No liability will be assumed for commercial shade variations or for materials with visible defects after such materials have been installed.
Colors
8 Standard Colors.
 |
